James hardie fire and acoustic design manual Southland

james hardie fire and acoustic design manual

James Hardie HardieFlex 2400 x 900 x 6mm Sheet Bunnings Fire Rated Wall Construction RAB Board is classified as ‘Non-Combustible Material’. For fire rated wall applications RAB Board must be installed as per the current James Hardie Fire and Acoustic Design Manual. RAB Board is suitable to achieve fire ratings up to 60 minutes when installed in accordance with fire systems specifications

RABв„ў Board

James Hardie product catalog ArchDaily. New PartiwallВ® Brochure Available Now! PartiwallВ® is ideal for separating walls between attached dwellings. The pioneering system of its kind in Australia, USG Boral PartiwallВ® has become one of the most widely used separating wall systems in attached villa units and townhouse developments., This design guide must be read in conjunction with the relevant and current James Hardie product install guides and relevant building code and regulations. please refer to James Hardie Fire and ACOUSTIC PERFORMANCE: The acoustic test reports in this manual have been certified by the RMIT. Systems used in building construction are tested.

3 2 Introduction This manual provides information about James Hardie two way fire and acoustic systems using timber or steel frames in residential or non residential construction, such as: n Separating walls in multi unit residential or commercial buildings n External walls close to boundaries In terms of the New Zealand Building Code (NZBC) requirements, fire rating is referred to as FRR James Hardie ‘Construction of fire and acoustically rated walls Technical In some of these applications, however, the design level of acoustic insulation does not always come from the BCA and instead may be FIRE AND ACOUSTICALLY RATED WALLS DESIGN MANUAL SEPTEMBER 2015 2 …

Resistant to fire and damage from moisture and rotting; Can be painted dark colours; Engineered to perform in harsh conditions, including coastal environments; 30, 60 and 90 minute fire resistance rating (FRR) can be achieved when installed as per the James Hardie Fire and Acoustic Design Manual; Can be used to achieve bracing James Hardie ‘Construction of fire and acoustically rated walls Technical In some of these applications, however, the design level of acoustic insulation does not always come from the BCA and instead may be FIRE AND ACOUSTICALLY RATED WALLS DESIGN MANUAL SEPTEMBER 2015 2 …

the designer and this James Hardie Technical Specification. when constructed in accordance with the James Hardie ‘Fire and Acoustic’ Design Manual. Linea Weatherboard must be face fixed for Fire Rated applications. Refer to Fire and Acoustic Design Manual for further information about fire rated systems. 2.10 ENERGY EFFICIENCY 3 2 Introduction This manual provides information about James Hardie two way fire and acoustic systems using timber or steel frames in residential or non residential construction, such as: n Separating walls in multi unit residential or commercial buildings n External walls close to boundaries In terms of the New Zealand Building Code (NZBC) requirements, fire rating is referred to as FRR

Find James Hardie MonotekВ® 2450 x 1200 x 9mm Sheet Rec 2 Sides at Bunnings Warehouse. Visit your local store for the widest range of building & hardware products. Can achieve a Fire rating up to 60 minutes when installed as per the current James Hardie Fire and Acoustic Design Manual; Design Ideas; Hamptons; Modern; Resources. Technical Library; Search products. myHardies TM Industry Professionals. Home > HardieSmart Fire & Acoustic Wall - Boundary Wall System . HardieSmart Fire & Acoustic Wall - Boundary Wall System . PRODUCT DETAILS. TECHNICAL RESOURCES. Features & Benefits. Fire Resistant. James Hardie International

the designer and this James Hardie Technical Specification. when constructed in accordance with the James Hardie ‘Fire and Acoustic’ Design Manual. Linea Weatherboard must be face fixed for Fire Rated applications. Refer to Fire and Acoustic Design Manual for further information about fire rated systems. 2.10 ENERGY EFFICIENCY James Hardie Fire & Acoustic Design Manual (Nov. 2015) Scion Linea Weatherboard Cladding One layer of James Hardie Scyon Linea Weatherboard cladding to external side of the timber framing. Refer to both Scyon Linea Weatherboard Technical Specification for information regarding fixing and finishing AND the James Hardie Fire Acoustic Manual (2015

HARDIESMARTTM BOUNDARY WALL SYSTEM DESIGN GUIDE PAGE 3 OF 20 Sealants (not supplied by James Hardie) Fire and Acoustic-Rated Sealant Use a tested and warranted fire and acoustic-rated sealant. Use in junctions and wall gaps to maintain fire and acoustic integrity of the system. Refer to Construction Details for specific uses. E.g. Bostik Resistant to fire and damage from moisture and rotting. Up to 60 minutes fire resistance rating (FRR) can be achieved when installed as per the James Hardie Fire and Acoustic Design Manual. Increases the overall rigidity of the structure, minimising structural movement.

Preferred Siding stood out, not only because of their experience with Hardie (they have done many projects, and do only Hardie), but because of the personal attention the company owner gives you. There are many choices to be made, from picking the precise Hardie product, to the trim you will use (or if you need new trim), and the overall design. When specifying or installing James HardieВ® products, ensure you have the current manual or guide. If in doubt, or you need penetrations and any wall gaps to maintain acoustic and fire integrity. The sealant may need to be water resistant DESIGN TOOLS James Hardie

Technical supplement CSP Architectural

james hardie fire and acoustic design manual

Ritek® XL Wall® James Hardie Systems Ritek. Cladding as per this specification. Refer to James Hardie Fire and Acoustic Design Manual for further guidance on achieving fire ratings. 2.8 STRUCTURAL BRACING Stria Cladding installed as per this specification cannot achieve any structural bracing. Bracing can be achieved by using RAB, James Hardie recommends the use of quality, hot-dipped galvanized nails. (James Hardie is not responsible for the corrosion resistance of fasteners.) ROOF CLEARANCE figure 3 At the juncture of the roof and vertical sur-faces, flashing and counterflashing shall be provided per the roofing manufacturer’s instructions. Provide a 1” - 2.

Design Guide SX Homes

james hardie fire and acoustic design manual

EJH1TL Two Way Fire Rated EXTERNAL or INTERNAL Wall. We're here to help What does your dream home look like? Browse our Feature Homes and How To articles and discover how cladding and weatherboards create beautiful, individual Looks on … This design guide must be read in conjunction with the relevant and current James Hardie product install guides and relevant building code and regulations. please refer to James Hardie Fire and ACOUSTIC PERFORMANCE: The acoustic test reports in this manual have been certified by the RMIT. Systems used in building construction are tested.

james hardie fire and acoustic design manual


Resistant to fire and damage from moisture and rotting. Up to 60 minutes fire resistance rating (FRR) can be achieved when installed as per the James Hardie Fire and Acoustic Design Manual. Increases the overall rigidity of the structure, minimising structural movement. constructed in accordance with the current James Hardie ‘Fire and Acoustic’ Design Manual. Linea Oblique Weatherboard is classified as a 'non-combustible' material suitable for use on walls close to a boundary. 2.8 STRUCTURAL BRACING Linea Oblique Weatherboard installed as per this specification cannot be used to achieve any structural bracing.

Dec 09, 2013В В· James Hardie Villaboard Lining James Hardie New Zealand Limited or tiled to create or complement a wide range of design looks. and also contextualises Villaboard Lining's fire and acoustic Australia September 2011 Research and Product Development from James Hardie James HardieВ® Internal Fire and Acoustically Rated Floor Solution This technical supplement must be read in conjuction with the current technical product literature. James HardieВ® building products must be installed in accordance with the applicable

HARDIESMARTTM BOUNDARY WALL SYSTEM DESIGN GUIDE PAGE 3 OF 20 Sealants (not supplied by James Hardie) Fire and Acoustic-Rated Sealant Use a tested and warranted fire and acoustic-rated sealant. Use in junctions and wall gaps to maintain fire and acoustic integrity of the system. Refer to Construction Details for specific uses. E.g. Bostik Fire Rated Wall Construction RAB Board is classified as ‘Non-Combustible Material’. For fire rated wall applications RAB Board must be installed as per the current James Hardie Fire and Acoustic Design Manual. RAB Board is suitable to achieve fire ratings up to 60 minutes when installed in accordance with fire systems specifications

HARDIESMARTTM BOUNDARY WALL SYSTEM DESIGN GUIDE PAGE 3 OF 20 Sealants (not supplied by James Hardie) Fire and Acoustic-Rated Sealant Use a tested and warranted fire and acoustic-rated sealant. Use in junctions and wall gaps to maintain fire and acoustic integrity of the system. Refer to Construction Details for specific uses. E.g. Bostik James Hardie Fire & Acoustic Design Manual (Nov. 2015) Scion Linea Weatherboard Cladding One layer of James Hardie Scyon Linea Weatherboard cladding to external side of the timber framing. Refer to both Scyon Linea Weatherboard Technical Specification for information regarding fixing and finishing AND the James Hardie Fire Acoustic Manual (2015

Dec 09, 2013 · James Hardie Villaboard Lining James Hardie New Zealand Limited or tiled to create or complement a wide range of design looks. and also contextualises Villaboard Lining's fire and acoustic constructed in accordance with the current James Hardie ‘Fire and Acoustic’ Design Manual. Linea Oblique Weatherboard is classified as a 'non-combustible' material suitable for use on walls close to a boundary. 2.8 STRUCTURAL BRACING Linea Oblique Weatherboard installed as per this specification cannot be used to achieve any structural bracing.

We're here to help What does your dream home look like? Browse our Feature Homes and How To articles and discover how cladding and weatherboards create beautiful, individual Looks on … James Hardie Versilux® lining is a premium sanded sheet which is an ideal lining for internal high traffic areas, fire and/or acoustic walls. Versilux lining is also used for ceilings and eaves/soffit applications. The features of Versilux lining are: n Durable internal lining sheet. n Suitable surface for paint finishes. n Square edges for

Design Ideas; Hamptons; Modern; Resources. Technical Library; Search products. myHardies TM Industry Professionals. Home > HardieSmart Fire & Acoustic Wall - Boundary Wall System . HardieSmart Fire & Acoustic Wall - Boundary Wall System . PRODUCT DETAILS. TECHNICAL RESOURCES. Features & Benefits. Fire Resistant. James Hardie International New PartiwallВ® Brochure Available Now! PartiwallВ® is ideal for separating walls between attached dwellings. The pioneering system of its kind in Australia, USG Boral PartiwallВ® has become one of the most widely used separating wall systems in attached villa units and townhouse developments.

james hardie fire and acoustic design manual

Find James Hardie Monotek® 2450 x 1200 x 9mm Sheet Rec 2 Sides at Bunnings Warehouse. Visit your local store for the widest range of building & hardware products. Can achieve a Fire rating up to 60 minutes when installed as per the current James Hardie Fire and Acoustic Design Manual; constructed in accordance with the current James Hardie ‘Fire and Acoustic’ Design Manual. Linea Oblique Weatherboard is classified as a 'non-combustible' material suitable for use on walls close to a boundary. 2.8 STRUCTURAL BRACING Linea Oblique Weatherboard installed as per this specification cannot be used to achieve any structural bracing.

drain (oil) valve assembly item no part no q'ty descripition remark 1 166-0015 1 washer 2 166-0025 1 compression spring 3 166-0048 1 water seal 4 166-0056 1 drain valve body 5 166-0065 1 main spindle of drain valve 6 166-0075 1 upper cover of drain valve 7 166-0085 1 drain valve swing 8 166-0095 1 motor fixed base 9 166-0105 1 drain valve draw Gm model washtech operator manual slow drain West Coast The GMC line, General Motors’ stab at creating a truck for the motorist, has been one of its more enduring lines, surviving in 2009 a rumored threat that it could be dropped from GM’s production line. Its survival was greeted warmly by fans of the vehicle, who consider it to be a highly reliable option.

Versilux lining CSP Architectural

james hardie fire and acoustic design manual

Versilux lining CSP Architectural. James Hardie Fire and Acoustic Rated Walls. The James Hardie fire and acoustic rated walls have been developed to assist you in selecting a suitable James Hardie product and to choose a system which will meet your performance requirements. We also have details of the systems available to assist in the material selection., Resistant to fire and damage from moisture and rotting; Can be painted dark colours; Engineered to perform in harsh conditions, including coastal environments; 30, 60 and 90 minute fire resistance rating (FRR) can be achieved when installed as per the James Hardie Fire and Acoustic Design Manual; Can be used to achieve bracing.

RitekВ® XL WallВ® James Hardie Systems Ritek

Versilux lining CSP Architectural. Fire And Acoustic Design Manual 3. BRANZ Appraisal James Hardie Rigid Air Barriers. RAB Board. Technical manual View. 1. HomeRAB Pre-Cladding & RAB Board Installation Manual 2. Fire and Acoustic Design Manual. Technical manual View; Safety Data Sheets. SDS James Hardie Base Coat; View; SDS James Hardie Base Coat., Australia September 2011 Research and Product Development from James Hardie James HardieВ® Internal Fire and Acoustically Rated Floor Solution This technical supplement must be read in conjuction with the current technical product literature. James HardieВ® building products must be installed in accordance with the applicable.

This design guide must be read in conjunction with the relevant and current James Hardie product install guides and relevant building code and regulations. please refer to James Hardie Fire and ACOUSTIC PERFORMANCE: The acoustic test reports in this manual have been certified by the RMIT. Systems used in building construction are tested Ritek В® XL Wall В® can be used for all internal and external walls. The sanded surface is ready for direct setting by your finishing trades to a level four finish, this removes the cost and time to batten out and plaster line internal walls speeding project completion.

James Hardie recommends the use of quality, hot-dipped galvanized nails. (James Hardie is not responsible for the corrosion resistance of fasteners.) ROOF CLEARANCE figure 3 At the juncture of the roof and vertical sur-faces, flashing and counterflashing shall be provided per the roofing manufacturer’s instructions. Provide a 1” - 2 James Hardie Versilux® lining is a premium sanded sheet which is an ideal lining for internal high traffic areas, fire and/or acoustic walls. Versilux lining is also used for ceilings and eaves/soffit applications. The features of Versilux lining are: n Durable internal lining sheet. n Suitable surface for paint finishes. n Square edges for

Design Ideas; Hamptons; Modern; Resources. Technical Library; Search products. myHardies TM Industry Professionals. Home > HardieSmart Fire & Acoustic Wall - Boundary Wall System . HardieSmart Fire & Acoustic Wall - Boundary Wall System . PRODUCT DETAILS. TECHNICAL RESOURCES. Features & Benefits. Fire Resistant. James Hardie International Find James Hardie MonotekВ® 2450 x 1200 x 9mm Sheet Rec 2 Sides at Bunnings Warehouse. Visit your local store for the widest range of building & hardware products. Can achieve a Fire rating up to 60 minutes when installed as per the current James Hardie Fire and Acoustic Design Manual;

3 2 Introduction This manual provides information about James Hardie two way fire and acoustic systems using timber or steel frames in residential or non residential construction, such as: n Separating walls in multi unit residential or commercial buildings n External walls close to boundaries In terms of the New Zealand Building Code (NZBC) requirements, fire rating is referred to as FRR James Hardie Fire and Acoustic Rated Walls. The James Hardie fire and acoustic rated walls have been developed to assist you in selecting a suitable James Hardie product and to choose a system which will meet your performance requirements. We also have details of the systems available to assist in the material selection.

Find James Hardie MonotekВ® 2450 x 1200 x 9mm Sheet Rec 2 Sides at Bunnings Warehouse. Visit your local store for the widest range of building & hardware products. Can achieve a Fire rating up to 60 minutes when installed as per the current James Hardie Fire and Acoustic Design Manual; Ritek В® XL Wall В® can be used for all internal and external walls. The sanded surface is ready for direct setting by your finishing trades to a level four finish, this removes the cost and time to batten out and plaster line internal walls speeding project completion.

Fire Rated Wall Construction RAB Board is classified as ‘Non-Combustible Material’. For fire rated wall applications RAB Board must be installed as per the current James Hardie Fire and Acoustic Design Manual. RAB Board is suitable to achieve fire ratings up to 60 minutes when installed in accordance with fire systems specifications the designer and this James Hardie Technical Specification. when constructed in accordance with the James Hardie ‘Fire and Acoustic’ Design Manual. Linea Weatherboard must be face fixed for Fire Rated applications. Refer to Fire and Acoustic Design Manual for further information about fire rated systems. 2.10 ENERGY EFFICIENCY

HARDIESMARTTM BOUNDARY WALL SYSTEM DESIGN GUIDE PAGE 3 OF 20 Sealants (not supplied by James Hardie) Fire and Acoustic-Rated Sealant Use a tested and warranted fire and acoustic-rated sealant. Use in junctions and wall gaps to maintain fire and acoustic integrity of the system. Refer to Construction Details for specific uses. E.g. Bostik the designer and this James Hardie Technical Specification. when constructed in accordance with the James Hardie ‘Fire and Acoustic’ Design Manual. Linea Weatherboard must be face fixed for Fire Rated applications. Refer to Fire and Acoustic Design Manual for further information about fire rated systems. 2.10 ENERGY EFFICIENCY

James Hardie product catalog ArchDaily

james hardie fire and acoustic design manual

RABв„ў Board. Australia September 2011 Research and Product Development from James Hardie James HardieВ® Internal Fire and Acoustically Rated Floor Solution This technical supplement must be read in conjuction with the current technical product literature. James HardieВ® building products must be installed in accordance with the applicable, Resistant to fire and damage from moisture and rotting. Up to 60 minutes fire resistance rating (FRR) can be achieved when installed as per the James Hardie Fire and Acoustic Design Manual. Increases the overall rigidity of the structure, minimising structural movement..

Preferred Siding Inc Customer Reviews James Hardie. This design guide must be read in conjunction with the relevant and current James Hardie product install guides and relevant building code and regulations. please refer to James Hardie Fire and ACOUSTIC PERFORMANCE: The acoustic test reports in this manual have been certified by the RMIT. Systems used in building construction are tested, Preferred Siding stood out, not only because of their experience with Hardie (they have done many projects, and do only Hardie), but because of the personal attention the company owner gives you. There are many choices to be made, from picking the precise Hardie product, to the trim you will use (or if you need new trim), and the overall design..

James Hardie HardieFlex 2400 x 900 x 6mm Sheet Bunnings

james hardie fire and acoustic design manual

James Hardie HardieFlex 2400 x 900 x 6mm Sheet Bunnings. Find James Hardie MonotekВ® 2450 x 1200 x 9mm Sheet Rec 2 Sides at Bunnings Warehouse. Visit your local store for the widest range of building & hardware products. Can achieve a Fire rating up to 60 minutes when installed as per the current James Hardie Fire and Acoustic Design Manual; Preferred Siding stood out, not only because of their experience with Hardie (they have done many projects, and do only Hardie), but because of the personal attention the company owner gives you. There are many choices to be made, from picking the precise Hardie product, to the trim you will use (or if you need new trim), and the overall design..

james hardie fire and acoustic design manual

  • EJH1TL Two Way Fire Rated EXTERNAL or INTERNAL Wall
  • James Hardie product catalog ArchDaily
  • Design Guide SX Homes

  • Design Ideas; Hamptons; Modern; Resources. Technical Library; Search products. myHardies TM Industry Professionals. Home > HardieSmart Fire & Acoustic Wall - Boundary Wall System . HardieSmart Fire & Acoustic Wall - Boundary Wall System . PRODUCT DETAILS. TECHNICAL RESOURCES. Features & Benefits. Fire Resistant. James Hardie International Resistant to fire and damage from moisture and rotting; Can be painted dark colours; Engineered to perform in harsh conditions, including coastal environments; 30, 60 and 90 minute fire resistance rating (FRR) can be achieved when installed as per the James Hardie Fire and Acoustic Design Manual; Can be used to achieve bracing

    constructed in accordance with the current James Hardie ‘Fire and Acoustic’ Design Manual. Linea Oblique Weatherboard is classified as a 'non-combustible' material suitable for use on walls close to a boundary. 2.8 STRUCTURAL BRACING Linea Oblique Weatherboard installed as per this specification cannot be used to achieve any structural bracing. Preferred Siding stood out, not only because of their experience with Hardie (they have done many projects, and do only Hardie), but because of the personal attention the company owner gives you. There are many choices to be made, from picking the precise Hardie product, to the trim you will use (or if you need new trim), and the overall design.

    Design Ideas; Hamptons; Modern; Resources. Technical Library; Search products. myHardies TM Industry Professionals. Home > HardieSmart Fire & Acoustic Wall - Boundary Wall System . HardieSmart Fire & Acoustic Wall - Boundary Wall System . PRODUCT DETAILS. TECHNICAL RESOURCES. Features & Benefits. Fire Resistant. James Hardie International James Hardie VersiluxВ® lining is a premium sanded sheet which is an ideal lining for internal high traffic areas, fire and/or acoustic walls. Versilux lining is also used for ceilings and eaves/soffit applications. The features of Versilux lining are: n Durable internal lining sheet. n Suitable surface for paint finishes. n Square edges for

    This design guide must be read in conjunction with the relevant and current James Hardie product install guides and relevant building code and regulations. please refer to James Hardie Fire and ACOUSTIC PERFORMANCE: The acoustic test reports in this manual have been certified by the RMIT. Systems used in building construction are tested New PartiwallВ® Brochure Available Now! PartiwallВ® is ideal for separating walls between attached dwellings. The pioneering system of its kind in Australia, USG Boral PartiwallВ® has become one of the most widely used separating wall systems in attached villa units and townhouse developments.

    When specifying or installing James HardieВ® products, ensure you have the current manual or guide. If in doubt, or you need penetrations and any wall gaps to maintain acoustic and fire integrity. The sealant may need to be water resistant DESIGN TOOLS James Hardie Ritek В® XL Wall В® can be used for all internal and external walls. The sanded surface is ready for direct setting by your finishing trades to a level four finish, this removes the cost and time to batten out and plaster line internal walls speeding project completion.

    May 16, 2013В В· Download a copy of the James Hardie Fire & Acoustic Design Manual. To learn more about the changes to NZBC Clause-C, you can contact your local James Hardie Territory Sales Manager and request for a practice/firm presentation. ASK JAMES HARDIE 0800 808 868 and request to be put through to your local representative. Resistant to fire and damage from moisture and rotting. Up to 60 minutes fire resistance rating (FRR) can be achieved when installed as per the James Hardie Fire and Acoustic Design Manual. Increases the overall rigidity of the structure, minimising structural movement.

    CUMULUS to Design Romania’s National Pavilion at Expo 2020 Dubai Manual of Recycling: Buildings as Sources of Materials James Hardie® Building Products are also now available in Asia James Hardie Versilux® lining is a premium sanded sheet which is an ideal lining for internal high traffic areas, fire and/or acoustic walls. Versilux lining is also used for ceilings and eaves/soffit applications. The features of Versilux lining are: n Durable internal lining sheet. n Suitable surface for paint finishes. n Square edges for