The enMotion Paper Towel Dispenser by Georgia Pacific offers an efficient, touchless solution for restrooms and breakrooms. This manual provides installation, operation, and maintenance guidance, ensuring optimal performance and hygiene while minimizing waste with its automated dispensing system.
1.1 Overview of the enMotion Dispenser
The enMotion Paper Towel Dispenser is a cutting-edge, automated solution designed for touchless operation, enhancing hygiene and efficiency in restrooms and breakrooms. It operates on 4 D-cell alkaline batteries, ensuring long battery life and minimal maintenance. The dispenser is engineered for jam-free performance and offers whisper-quiet dispensing. With sleek, modern styling, it complements any facility’s aesthetic while providing reliable service. Compatible with enMotion roll towels, it reduces waste and offers customizable settings to meet specific needs. Its advanced design ensures consistent performance, making it a leader in automated towel dispensing technology.
1.2 Key Features and Benefits
The enMotion Dispenser boasts a touchless, automated design that enhances hygiene and reduces contamination risks. It features whisper-quiet operation, ensuring minimal noise during use. With adjustable settings, users can customize towel length and dispensing modes to suit their preferences. The dispenser is compatible with enMotion roll towels, offering a reliable and consistent supply. Its jam-free mechanism and extended battery life reduce maintenance needs, while the sleek, modern styling fits seamlessly into any environment. These features make it an ideal choice for high-traffic areas, providing efficiency, convenience, and a touchless experience.
Installation Instructions
Begin by removing the existing dispenser and preparing the area. Tap the hinge pin to expose it, then align and secure the new dispenser. Use a screwdriver to fasten it properly. Ensure the unit is level and firmly mounted. Follow the manual’s specific instructions for your model, including battery installation and initial setup. Refer to the provided guide for detailed steps to complete the installation successfully.
2.1 Preparing the Area for Installation
Before installing the enMotion Paper Towel Dispenser, ensure the area is clear of obstructions. Remove any existing dispensers by releasing screws or clips. Clean the wall surface thoroughly with a mild cleaner to remove dirt and grime. Allow the area to dry completely to ensure proper mounting. Check for any electrical outlets or plumbing behind the installation site to avoid interference. Use a level to confirm the wall is even and measure the space to ensure the dispenser fits appropriately. Gather all necessary tools and hardware, such as screws and a screwdriver, and consult the manual for specific preparation requirements.
2.2 Mounting the Dispenser
To mount the enMotion Paper Towel Dispenser, align it with the mounting holes on the wall, ensuring proper positioning. Remove any existing dispenser by releasing screws or clips. Attach the new dispenser using the provided screws, making sure it is securely fastened. Use a level to confirm the dispenser is straight and evenly aligned. Tighten all screws firmly to prevent movement. If installing a recessed model, ensure the unit fits flush with the wall. Double-check the alignment and refer to the manual for specific mounting instructions to ensure stability and proper functionality.
Loading and Dispensing Paper Towels
The enMotion dispenser efficiently loads and dispenses roll towels. Insert the roll, thread the paper through the dispenser, and align it properly for smooth, touchless dispensing.
3.1 How to Load enMotion Roll Towels
To load the enMotion roll towels, open the dispenser by releasing the latch or removing the cover. Remove any remaining paper from the previous roll. Take the new roll of enMotion roll towels and align it with the dispenser’s spindle, ensuring the paper unwinds in the correct direction. Secure the roll firmly and thread the paper through the dispensing slot. Make sure the edge of the paper is properly aligned and fed through the rollers. Close the dispenser and test the dispensing mechanism to ensure smooth operation. Always use compatible enMotion roll towel products for optimal performance.
3.2 Threading the Paper Through the Dispenser
After loading the roll, locate the paper edge and gently insert it into the dispenser’s feeding slot; Guide the paper through the rollers, ensuring it aligns correctly with the dispensing mechanism. Rotate the roll slightly to help the paper feed smoothly through the system. Once the paper is threaded, close the dispenser and test it by dispensing a sheet to confirm proper function. Ensure the paper feeds evenly and without resistance. Proper threading is essential for consistent dispensing performance and to prevent jams or misfeeds.
Operation and Usage
The enMotion dispenser operates via sensor activation, dispensing paper towels automatically when hands are detected. It offers customizable settings for sheet length and dispensing modes, optimizing efficiency and user convenience in high-traffic areas.
4.1 Dispensing Modes and Settings
The enMotion dispenser offers two primary dispensing modes: on-demand and continuous. On-demand mode dispenses a set amount of paper towels when a hand is detected, while continuous mode allows for constant dispensing. Users can adjust settings such as sheet length and sensitivity via the control panel. The dispenser also features customizable delays between activations to prevent over-dispensing. These settings can be tailored to meet specific needs, ensuring efficient paper towel usage and minimizing waste. The touchless, sensor-activated design ensures hands-free operation, promoting hygiene and convenience in high-traffic environments.
4.2 Adjusting the Dispenser Settings
To customize the enMotion dispenser, users can adjust settings via the control panel. The dispenser offers adjustable sheet lengths and sensitivity levels to accommodate different preferences. You can switch between on-demand and continuous dispensing modes, depending on usage needs. The control panel may include buttons or dials to fine-tune these settings. Adjustments are typically saved automatically, ensuring consistent performance. These customizable options allow users to balance convenience, efficiency, and paper towel usage, optimizing the dispenser for specific environments while maintaining its touchless, hands-free functionality and reducing waste.
Maintenance and Cleaning
Regular maintenance and cleaning are essential for optimal performance. Wipe down surfaces, ensure proper battery function, and check for debris buildup. Refer to the manual for detailed cleaning instructions.
5.1 Cleaning the Dispenser
Regular cleaning of the enMotion Paper Towel Dispenser is essential to maintain hygiene and functionality. Use a soft, damp cloth to wipe down the exterior and dispensing area, ensuring no moisture enters internal components. Avoid harsh chemicals or abrasive cleaners, as they may damage the finish. Pay special attention to high-touch areas and any visible debris buildup. For stubborn stains, a mild soap solution can be used, but rinse thoroughly to prevent residue. Cleaning ensures optimal performance and prevents contamination, keeping the dispenser in excellent working condition.
5.2 Replacing Batteries
To ensure uninterrupted operation, replace the batteries when the low-battery indicator lights up. Turn off the dispenser and open the battery compartment, usually located at the bottom or back. Remove the old batteries and insert four new D-cell alkaline batteries, following the polarity markings. Close the compartment securely and test the dispenser by waving your hand in front of it. For optimal performance, use high-quality alkaline batteries and avoid mixing old and new ones. Properly dispose of used batteries according to local regulations to promote sustainability.
Troubleshooting Common Issues
Identify common issues like jamming or non-dispensing by checking error lights or unusual noises. Refer to the manual for solutions or reset the dispenser if necessary.
6.1 Resolving Dispenser Malfunctions
If the dispenser malfunctions, check for error lights or unusual noises. Ensure batteries are installed correctly and replace them if necessary. For jamming issues, switch off the dispenser, remove any obstructed paper, and reload according to the manual. If the dispenser fails to dispense, verify that the paper towel roll is properly threaded and aligned. For persistent issues, consult the troubleshooting guide or contact customer support. Regular maintenance and proper loading can prevent most malfunctions, ensuring smooth and efficient operation.
6.2 Understanding Error Lights and Signals
The enMotion dispenser uses error lights to indicate specific issues. A flashing red light may signal low battery or a paper jam, while a steady red light could indicate an empty roll. Green lights typically show normal operation. If error lights appear, check the dispenser’s battery level and ensure it is properly powered. Verify that the paper towel roll is correctly loaded and not obstructed. For persistent issues, consult the troubleshooting guide or refer to the manual for detailed explanations of each light sequence and corrective actions. Understanding these signals helps maintain optimal dispenser functionality and user satisfaction;
Technical Specifications
The enMotion dispenser operates on 4 D-cell alkaline batteries, features a compact design with specific dimensions, and is compatible with enMotion 10 paper towel rolls.
7.1 Compatible Paper Towel Products
The enMotion Paper Towel Dispenser is specifically designed to work with enMotion 10 Paper Towels (product code 89460) and enMotion 10 Recycled Paper Towels. These products are engineered to ensure smooth, jam-free operation and optimal performance. The enMotion 10 Paper Towels are designed with a unique sheet length that minimizes waste and reduces the frequency of refills. Using compatible products ensures the dispenser functions as intended, maintaining hygiene and efficiency. For best results, avoid using non-compatible paper towel rolls, as they may cause misfeeding or jams. Always refer to the dispenser’s manual for a full list of approved products.
7.2 Dimensions and Weight of the Dispenser
The enMotion Paper Towel Dispenser is designed to be compact and lightweight, ensuring easy installation and minimal space usage. Its sleek dimensions make it suitable for various restroom or breakroom settings. Weighing approximately [insert weight], the dispenser is durable yet lightweight, facilitating straightforward mounting and relocation. The unit’s streamlined design ensures it fits seamlessly into modern environments without compromising functionality. For precise measurements, refer to the product manual or manufacturer’s specifications, which provide exact height, width, and depth to aid in installation planning and space allocation.
FAQs and Warranty Information
Frequently asked questions address reloading, compatible refills, and warranty details. The enMotion dispenser is backed by a comprehensive warranty, ensuring customer support and product reliability for years.
8.1 Frequently Asked Questions
Common questions include how to reload the dispenser, compatible refill products, and warranty details. The enMotion dispenser uses specific enMotion roll towels for optimal performance. Users often inquire about adjusting settings or resolving minor malfunctions, such as paper jams or sensor issues. The dispenser operates on 4 D-cell alkaline batteries, which typically last up to 3 years under normal use. For troubleshooting, refer to the error light signals in the manual. Warranty information varies by region but generally covers defects for a specified period. Visit the official support website for detailed FAQs and assistance.
8.2 Warranty and Support Details
The enMotion dispenser is backed by Georgia Pacific’s warranty, covering manufacturing defects for a specified period. For detailed warranty terms, visit the official website or contact customer support. Extended support is available through online resources, including manuals, troubleshooting guides, and FAQs. Users can access instructional videos and download PDF manuals for further assistance. Support services are designed to ensure optimal performance and address any operational concerns promptly. Warranty inquiries and technical support can be directed to Georgia Pacific’s customer service team for personalized assistance.
The enMotion Paper Towel Dispenser is a reliable and efficient solution for touchless dispensing in restrooms and breakrooms. Its whisper-quiet operation, jam-free design, and extended battery life make it a top choice for maintaining hygiene and reducing waste. The manual provides comprehensive guidance for installation, maintenance, and troubleshooting, ensuring users can maximize the dispenser’s performance. With a focus on sustainability and durability, the enMotion dispenser is an excellent investment for any facility. Georgia Pacific’s support resources, including FAQs and warranty details, further enhance the user experience, providing peace of mind and long-term satisfaction.